commit b4de6853f20916c2197fc96279381f9f9a040b34
Author: Ghassan Yusuf <ghassan.yousif.83@gmail.com>
Date:   Sun Mar 23 01:21:38 2025 +0300

    Add ReadMe

diff --git a/ReadMe.md b/ReadMe.md
new file mode 100644
index 0000000..3196b7e
--- /dev/null
+++ b/ReadMe.md
@@ -0,0 +1,145 @@
+**L298N_ESP32 Library Documentation**
+=====================================
+
+### Table of Contents
+-----------------
+
+* [Introduction](#introduction)
+* [Installation](#installation)
+* [Functions](#functions)
+	+ [Constructor](#constructor)
+	+ [begin()](#begin)
+	+ [setMin()](#setmin)
+	+ [setMax()](#setmax)
+	+ [invert()](#invert)
+	+ [forward()](#forward)
+	+ [backward()](#backward)
+	+ [goMin()](#gomax)
+	+ [goMax()](#gomax)
+	+ [setSpeed()](#setspeed)
+	+ [setPercentage()](#setpercentage)
+	+ [override()](#override)
+	+ [stop()](#stop)
+	+ [command()](#command)
+
+### Introduction
+---------------
+
+The L298N_ESP32 library is a dual H-bridge motor driver with ESP32 support. It provides a simple and easy-to-use API for controlling DC motors using the L298N IC.
+
+### Installation
+-------------
+
+1. Install the Arduino IDE.
+2. Install the ESP32 board package.
+3. Clone or download this repository into your Arduino library folder (`~/.arduino/libraries/L298N_ESP32`).
+4. Import the library in your sketch by adding `#include <L298N_ESP32.h>`.
+
+### Functions
+-------------
+
+#### Constructor
+----------------
+
+* Initializes the motor driver with the specified pins and channel.
+* Parameters:
+	+ `in1`: Pin for input 1 ( HIGH for direction).
+	+ `in2`: Pin for input 2 (HIGH for direction).
+	+ `en`: Pin for enable signal (PWM output).
+	+ `channel`: PWM channel number (optional, default: 0).
+
+#### begin()
+----------------
+
+* Initializes the motor driver and sets up the pins.
+* Sets the PWM frequency to 30kHz and resolution to 8-bit.
+
+#### setMin() and setMax()
+--------------------------------
+
+* Sets the minimum and maximum speed values for the motor.
+* Parameters:
+	+ `value`: Minimum/maximum speed value (0-255).
+
+#### invert()
+-------------
+
+* Inverts the direction of the motor.
+
+#### forward() and backward()
+------------------------------
+
+* Sets the motor to move forward or backward.
+* Note: These functions override any previous speed setting.
+
+#### goMin() and goMax()
+-------------------------
+
+* Sets the motor to run at minimum or maximum speed.
+
+#### setSpeed() and setPercentage()
+--------------------------------------
+
+* Sets the motor speed using a percentage value (0-100) or an absolute speed value (0-255).
+* Note: These functions are equivalent to `setSpeed()` and override any previous setting.
+
+#### override()
+-----------------
+
+* Manually sets the PWM output value.
+* Parameters:
+	+ `value`: PWM output value (0-255).
+
+#### stop()
+------------
+
+* Stops the motor by setting the speed to 0.
+
+#### command()
+--------------
+
+* Provides a serial interface for interacting with the motor driver.
+* Returns the last tried value as an unsigned integer.
+* Note: This function is not recommended for use in production code.
+
+Example usage:
+
+Here's an example Arduino code that utilizes the `L298N_ESP32` library:
+
+```c
+#include <L298N_ESP32.h>
+
+// Create an instance of the L298N motor driver
+L298N_ESP32 myMotor(2, 3, 4);
+
+void setup() {
+  Serial.begin(9600);
+  myMotor.begin();
+}
+
+void loop() {
+  // Set the motor to move forward at maximum speed
+  myMotor.forward();
+  delay(2000);
+
+  // Set the motor to move backward at maximum speed
+  myMotor.backward();
+  delay(2000);
+
+  // Set the motor to run at minimum speed
+  myMotor.goMin();
+  delay(2000);
+
+  // Set the motor to run at 50% of maximum speed
+  myMotor.setPercentage(50);
+  delay(2000);
+
+  // Manually set the PWM output value to 150
+  myMotor.override(150);
+  delay(2000);
+
+  // Stop the motor
+  myMotor.stop();
+  delay(2000);
+}
+```
\ No newline at end of file