the code didnt work so i created example sender and receiver code

espnow-remote/espnow-remote.ino

@@ -5,6 +5,9 @@
   // HEADER FILE
   #include  "header.h"
 
+  // REPLACE WITH YOUR RECEIVER MAC ADDRESS - 1C:69:20:E9:13:EC
+  // uint8_t receiverMacAddress[] = {0x1C, 0x69, 0x20, 0xE9, 0x13, 0xEC};  // 1C:69:20:E9:13:EC
+
 //==========================================================
 //  SETUP
 //==========================================================
@@ -13,10 +16,41 @@
   void setup() {
     
     Serial.begin(115200);
+
+    Serial.println();
+    Serial.println(WiFi.macAddress());
+    WiFi.mode(WIFI_STA);
+    delay(5000);
+
     JY.setPin(X_AXIS_PIN, Y_AXIS_PIN, SWITCH_PIN);
     JY.begin();
+
     // StartWireless();  // Initialize ESP-NOW
 
+    // Init ESP-NOW
+    if(esp_now_init() != ESP_OK) {
+      Serial.println("Error initializing ESP-NOW");
+      return;
+    } else {
+      Serial.println("Succes: Initialized ESP-NOW");
+    }
+
+    esp_now_register_send_cb(OnDataSent);
+    
+    // Register peer
+    esp_now_peer_info_t peerInfo;
+    memcpy(peerInfo.peer_addr, receiverMacAddress, 6);
+    peerInfo.channel = 0;  
+    peerInfo.encrypt = false;
+    
+    // Add peer        
+    if(esp_now_add_peer(&peerInfo) != ESP_OK) {
+      Serial.println("Failed to add peer");
+      return;
+    } else {
+      Serial.println("Succes: Added peer");
+    } 
+
   }
 
 //==========================================================
@@ -26,15 +60,24 @@
   // LOOP
   void loop() {
     
-    JD.X = map(average(JY.readX(), 10), 0, 4095, 0, 255);  // Map to 0-255
-    JD.Y = map(average(JY.readY(), 10), 0, 4095, 0, 255);  // Map to 0-255
-    JD.B = JY.readB();
+    JD.X = map(analogRead(32), 0, 4095, 0, 100); //map(average(JY.readX(), 10), 0, 4095, 0, 255);  // Map to 0-255
+    JD.Y = map(analogRead(33), 0, 4095, 0, 100); //map(average(JY.readY(), 10), 0, 4095, 0, 255);  // Map to 0-255
+    JD.B = digitalRead(34); //JY.readB();
 
     Serial.print(JD.X); Serial.print(" "); 
     Serial.print(JD.Y); Serial.print(" "); 
     Serial.println(!JD.B);
 
     // SendData(JD);  // Uncomment to send data
+
+    esp_err_t result = esp_now_send(receiverMacAddress, (uint8_t *) &JD, sizeof(JD));
+    if (result == ESP_OK) {
+      // Serial.println("Sent with success");
+    } else {
+      // Serial.println("Error sending the data");
+    }
+
+
     delay(20);
 
   }

espnow-remote/header.h

@@ -6,9 +6,9 @@
   #include  "joystic.h"
 
   // JOYSTIC PIN DEFINITION
-  #define   X_AXIS_PIN    32  // ADC1_CH4 (Valid)
-  #define   Y_AXIS_PIN    33  // ADC1_CH5 (Valid)
-  #define   SWITCH_PIN    34  // Changed from 25 (now ADC1_CH6)
+  #define X_AXIS_PIN    32  // ADC1_CH4 (Valid)
+  #define Y_AXIS_PIN    33  // ADC1_CH5 (Valid)
+  #define SWITCH_PIN    34  // Changed from 25 (now ADC1_CH6)
 
   // DATA STRUCTURE
   struct JoysticData {
@@ -36,7 +36,7 @@
   // THE RECEIVER MAC ADDRESS
   // 1C:69:20:E9:13:EC
   
-  // REPLACE WITH YOUR RECEIVER MAC ADDRESS
+  // REPLACE WITH YOUR RECEIVER MAC ADDRESS - 1C:69:20:E9:13:EC
   uint8_t receiverMacAddress[] = {0x1C, 0x69, 0x20, 0xE9, 0x13, 0xEC};  // 1C:69:20:E9:13:EC
     
   // CALLBACK WHEN DATA IS SENT