Modifying

Buzzer.ubl

@@ -1,16 +0,0 @@
-module Buzzer
-author unknown
-version 1 0 
-description ''
-
-  spec ' ' 'Buzzer' 'Buzzer Pin _ State _' 'auto bool' 5 true
-  spec ' ' 'Buzzer2 Pin' 'Buzzer Pin _ Note _' 'auto auto' 5 1000
-
-to Buzzer Pin State {
-  digitalWriteOp Pin State
-}
-
-to 'Buzzer2 Pin' Pin Note {
-  analogWriteOp Pin Note
-}
-

README.md

@@ -1,13 +1,13 @@
 # Buzzer Library for MicroBlocks
 
 Welcome to the **Buzzer Library** for MicroBlocks!  
-This library makes it easy for anyone—even if you don’t know how to code or use a computer much—to control a fan motor using simple blocks in MicroBlocks.
+This library makes it easy for anyone—even if you don’t know how to code or use a computer much—to control a buzzer using simple blocks in MicroBlocks.
 
 ---
 
 ## Features
 
-- **Easy drag-and-drop blocks** for controlling your fan motor
+- **Easy drag-and-drop blocks** for controlling your buzzer
 - **No coding required**
 - **Turn on & off the buzzer**
 - **Control the notes**
@@ -20,14 +20,14 @@ This library makes it easy for anyone—even if you don’t know how to code or
 **What you need:**
 - Spark microcontroller and connecting wires
 - MicroBlocks IDE installed ([Download here](https://microblocks.fun/download/))
-- A fan motor and basic connecting wires
+- A buzzer and basic connecting wires
 
 ---
 
 ## Installation
 
-1. **Download the Fan Motor Library:**  
+1. **Download the buzzer Library:**  
-   Download the library file from [here](Buzzer.ubl).
+   Download the library file from [here](Spark_Digital.ubl).
 
 2. **Open MicroBlocks IDE** on your computer.
 
@@ -51,12 +51,12 @@ This library makes it easy for anyone—even if you don’t know how to code or
     - Turn Buzzer On and Off
     - Change Note"
 
-5. **Click the green flag** or “Run” to start controlling your fan!
+5. **Click the green flag** or “Run” to start controlling your buzzer!
 
 ---
 ## Example Project
 
-![](Images/4.png)
+![](Images/6.png)
 
 After setting the pin value, there are two ways to use a buzzer:
 
@@ -65,19 +65,5 @@ After setting the pin value, there are two ways to use a buzzer:
 
 ---
 
-## Troubleshooting
+*Have fun building with your buzzer!*
-
-- **Fan not spinning?**  
-  - Double-check your wiring.
-  - Make sure your microcontroller is powered on.
-
-- **Blocks not showing up?**  
-  - Make sure you imported the library correctly.
-
-- **Still stuck?**  
-  - See the “Contact” section below!
-
----
-
-*Have fun building with your Buzzer!*
 

Spark_Digital.ubl

@@ -0,0 +1,46 @@
+module Spark_Digital 'cat;Data'
+author 'Fatima Idrees'
+version 1 0 
+description ''
+
+  spec ' ' 'Buzzer' 'Buzzer Pin _ Tone _' 'num num' 5 1000
+  spec ' ' 'Buzzer2' 'Buzzer Pin _ State _' 'auto bool' 5 false
+  spec ' ' 'LED' 'LED Pin _ State _' 'num bool' 18 false
+  spec ' ' 'LED2 Pin' 'LED Pin _ Brightness _' 'num auto' 18 1000
+  spec 'r' 'Button Pin' 'Button Pin _' 'auto' 27
+  spec 'r' 'Inverted Button Pin' 'Inverted Button Pin _' 'auto' 27
+
+to 'Button Pin' Input {
+  local 'Read1' (digitalReadOp Input 'up')
+  if (Read1 == (booleanConstant true)) {
+    return (not Read1)
+  } else {
+    return (booleanConstant true)
+  }
+}
+
+to Buzzer Pin Tone {
+  analogWriteOp Pin Tone
+}
+
+to Buzzer2 Pin State {
+  digitalWriteOp Pin State
+}
+
+to 'Inverted Button Pin' Input {
+  local 'Read2' (digitalReadOp Input 'up')
+  if (Read2 == (booleanConstant false)) {
+    return Read2
+  } else {
+    return (booleanConstant true)
+  }
+}
+
+to LED Pin State {
+  digitalWriteOp Pin State
+}
+
+to 'LED2 Pin' Pin Brightness {
+  analogWriteOp Pin Brightness
+}
+

Versions/README.md

@@ -3,15 +3,23 @@
 ## Version 01
 
 ![](../Images/1.png)
- ![](../Images/3.png)
+![](../Images/3.png)
 
 It essentially turns the buzzet on or off and allows the user to adjust its notes.
 
 
+---
+
+# Version 02
+
+![](../Images/5.png)
+
+Modified to suit the new library.
+
 ---
 
 ## Usage Example
 
-![](../Images/4.png)
+![](../Images/6.png)
 
 A way to test the function!