Buzzer Library for MicroBlocks

Welcome to the Buzzer Library for MicroBlocks!
This library makes it easy for anyone—even if you don’t know how to code or use a computer much—to control a buzzer using simple blocks in MicroBlocks.

---

Features

• Easy drag-and-drop blocks for controlling your buzzer
• No coding required
• Turn on & off the buzzer
• Control the notes
• Beginner-friendly instructions

---

Getting Started

What you need:

• Spark microcontroller and connecting wires
• MicroBlocks IDE installed (Download here)
• A buzzer and basic connecting wires

---

Installation

1. Download the buzzer Library:
   Download the library file from here.

2. Open MicroBlocks IDE on your computer.

3. Add the Library:

   • Go to the library manager in MicroBlocks.
   • Click “Import Library” or drag and drop the downloaded file into the IDE.

---

How to Use

1. Connect your Buzzer to your microcontroller’s pins (see your board’s pinout for details).

2. Open MicroBlocks IDE and make sure your board is connected.

3. Find the Buzzer blocks in the blocks menu.

4. Drag the blocks you want to use into your script area.

   • For example:
   • “Set Pin Value
   • Turn Buzzer On and Off
   • Change Note"

5. Click the green flag or “Run” to start controlling your buzzer!

---

Example Project

After setting the pin value, there are two ways to use a buzzer:

1. You can simply turn it on or off.
2. You can adjust its notes.

---

Troubleshooting

• Fan not spinning?

  • Double-check your wiring.
  • Make sure your microcontroller is powered on.

• Blocks not showing up?

  • Make sure you imported the library correctly.

• Still stuck?

  • See the “Contact” section below!

---

Have fun building with your fan motor!